Services and Pricing

Use this services and pricing guide to get an idea of what Bluestone Woodwork can do for you, and get a general idea of what your costs might be. Once you have submitted our project intake form, someone will get back to you with a request for further details and/or a detailed estimate of your full costs. 

In order to get your project in our queue, we typically require a 50% deposit, with the remainder due at pickup.

Please note: all projects are priced individually based on complexity, labor, size, materials, and other factors. This guide is meant to provide you with a starting point and the fees listed here are subject to change.

CNC Cutting and Engraving

Initial CNC project fees start at $350, plus materials* and includes:

  • Initial consultation via email to go over your designs

  • 1 hour of CAD Design & CNC programming 

  • 1 small set of sketch ups or cut diagrams if necessary

  • 1 hour of CNC setup, cutting, and cleanup

  • 30 minutes of off machine cleanup and assembly if necessary

All work beyond this scope is charged at $100 per hour.

Questions about doing a CNC project with us? We hope our CNC FAQ can help!

Laser Cutting and Engraving

Initial laser engraving project fees start at $130 for a simple engraving (2-3 lines of text within a space of 6x6 inches, for instance) , plus materials*, and includes:

  • Initial consultation via email to go over customer designs and layout

  • 60 minutes of graphic design time

  • 30 minutes of laser engraving time + minor cleanup (e.g. light sanding) if necessary 

Larger projects and any work beyond this scope is charged at $75-$100 per hour, depending on the nature of the work.

Carpentry & Furniture Making

Carpentry projects are priced by the hour, plus materials. Fees start at a $120 minimum for one hour of work and $120 per hour after that, charged incrementally. The use of specialty equipment, or projects over 6 feet in length or width may incur additional charges. Charges could include things like:

  • Sourcing and milling of lumber

  • Jointing, planing, and cutting to size

  • Glue ups

  • Assembly

  • Sanding

  • Hardware sourcing and installation

  • Finish processes and materials

  • Use of specialty tools or equipment

  • Over-sized project fees

Milling

Milling your lumber – jointing, planing and rough cutting to size – can be the first step in ensuring the success of your project. However, milling equipment is expensive, large and can be difficult to maintain. It takes practice and skill to use these machines safely and to get the best results. We can mill your rough lumber for you at a rate of $120/hr with a minimum of $120, and $100 per hour for each additional hour, charged incrementally.

Please note:

  • Lumber/Plywood must be purchased through The Woodworkers Club

  • Additional flattening, gluing, sizing, shaping, etc. of hardwood lumber and slabs  is priced per job (see Carpentry Project pricing above)

CNC Slab Flattening & Wide Belt Sanding

CNC Slab Flattening starts $250 for one hour and then $150 per additional hour. Slabs over 8 foot in length incur an additional $150 for extra setup.

Wide Belt sanding starts at $150 for one hour and then $100 per additional hour.

*We do not have control over the cost of materials